revchris: (Default)
This week I've been practicing my drywall taping skills. They need work. I've got the basics down, but now need to work on the details, especially inside corners. The first joint I taped bubbled (and I've since peeled the tape off and mudded it over sans tape), the second one is ok, and the first inside corner needs some sanding and then will be done.

I've got another inside corner on the wall, and a pair of small butt joints (that I may skip as they'll eventually be covered with door frame trim), and will have more joints once I start in on enclosing the stairs.

The garden beds are cleaned out, tilled, and replanted with tomatoes, onions, and radishes. I need to screw down the screen frames over them yet (we took them off to work on the spading/tilling).

Today I decided that the flag in the front yard needed replacing, so I got a new one at Meikle's, along with some yard stuff and charcoal.

We're cooking meat for the week today. There's a beef brisket in the smoker (cherry smoke, Smoky Jon's Flavor Magic seasonings, and brown sugar and other seasoning in the water, which we're basing the meat with occasionally), boneless pork rib ends in the crock pot (dried cranberries, ginger, other spices), and we might also do brats later (Johnsonville original). I've also got a recipe for fried peach pies that I might try later.


May. 17th, 2010 08:03 pm
revchris: (Default)
We did the Janesville Renaissance Faire this weekend. The weather was great, but Sunday got a bit windy (people buy less on windy days, or we'd probably have broken our sales record this year). The truck is mostly unpacked, and we haven't started on the trailer yet.

We don't have the best luck with the trailer at Janesville. Last year I put the two small oxygen tanks in the trailer at the last minute, and, of course, stuck them in by the back door because that's where the empty space was. Most of the route to Janesville on I94 is just the right bump frequency to make the trailer sway all over the road if it's loaded wrong (we did most of the trip at about 45-50mph to keep the trailer stable). This year I had it loaded better, but we didn't get over 55. On the way home I loaded the trailer full (i.e. - heavier) and it was more stable, but then it bounced - and the truck resonates with the bouncing - at anything over about 60.

Today I unloaded most of the truck (mainly so that I could get the cooler out of it and put away the rest of the snacks) and then Jim from Steinhafels came over to fix the sofa. Most furniture manufacturers no longer use screws, only smooth-wire staples, which means that the joints can work loose, because many of them also no longer worry too much about whether the joints are glued together, either. Jim opened up the back of the sofa, clipped off all of the out-of-place staples, added some glue to every joint he worked on, and then screwed everything back together and added some extra reinforcement anywhere he felt it'd help. The sofa is still in the original warranty, but we bought the extended (5 year) warranty because neither of us is petite, and we knew something like this would eventually happen.

After lunch I got out the trimmer and did the whole yard. Then, having decided from the amount of yard splattered all over me that I wasn't going to be allergic to the yard this year (last year I ran into something that had me breaking out after trimming), I mowed. I did the first two thirds of the yard, took a break, and then finished the mowing. While I was finishing [profile] teeka cut circles out of paper grocery back that I then put around all the little trees before I mulched around them. The bag should kill the grass around the tree and then degrade allowing water to go through the mulch without problems. Tomorrow I'm going to do the shrubs by the driveway, and then we may work on other yard stuff, or we might start in on painting in the guest room.


Mar. 7th, 2010 05:37 pm
revchris: (Default)
The kitchen sink plugged up today.

Not unexpected, or difficult to fix. However, it's pointed out a problem in my home plumbing that may need to be remedied.

I tried plungering the clog, but that didn't work, so when I ran out for groceries, I got some liquid plumber and a drain snake to try to clear it.

After the snake ran the full 20' into the drain, and the clog didn't break, I figured something weird was up, since the dishwasher drains correctly, and it enters the drain snake right at basement ceiling height, about 2' below where the sink drain enters.

I pulled the snake out and ran it in again, this time spinning it with the drill instead of by hand, to see if the extra motion would help. All the way in, still clogged. On a hunch, I went outside and looked at the roof, and the snake is coming out of the vent. I pulled the snake and poured in an entire bottle of Liquid Plumr max gel, and am waiting to see if it does anything.
revchris: (Default)
Anybody good at welding stainless, or know anyone who is, and is willing to work for homebrew?

Todd (neighbor across the street) has a line on 1 gallon stainless kegs (that take a standard tapper).

The problem is that they've got burst disks milled into the body of the keg, and the disks were milled too deep, so they rupture really easily. He figures that if he can find someone to over-weld the milled area, he can use them for homebrew, but right now, they seem to burst the disk at only a couple PSI.

His only concern is that the weld be fairly smooth on the inside, as a rough weld will be too difficult to keep clean.


May. 14th, 2009 09:15 pm
revchris: (Default)
After dinner tonight somebody said "There's still some light, come outside and help me plant."

So, we did.

The west side of the house now has moss roses, coleus, begonia, and something that one of the customers at the Vinery was getting rid of.
revchris: (Default)
I discovered last week that it was getting to be time for a new cordless drill. The casing on mine is starting to crack around the trigger, probably from old age and being dropped too many times.

I bought it about the time the 18V drills were brand new (the date code inside the handle is 1996!), so I have no problem with it not lasting long enough. I bought a DeWalt DC920A kit (two batteries, case, charger), so now I have four batteries and two chargers. So far the two biggest improvements are that it now comes with a side handle and the case holds three batteries (two in the box, one in the drill) plus the charger and space for odds and ends.

[ profile] teeka told me that now that I had a new drill, I had to make her something, so I built a new frit rack for the studio, which didn't really need the drill, as it's mostly dadoed and nailed together.

When I bought the table saw, my father in law gave me a box of blades and stuff he'd had for a while but never used. I finally really looked through it. There's two dado blades (one adjustable, on stacking), a shaper blade with 5 sets of cutters, and a dado insert that doesn't fit my saw.

I'll play with the shaper kit one of these days, but the stacked dado worked well for the frit rack: the top and bottom are rabetted into the sides, and the five shelves are dadoed, with everything going a lot faster than trying to do it with the miter saw or a router.
revchris: (Default)
Sunday afternoon we broke the bed. One of the box spring halves cracked along the center line of the bed, right where the rail of the box spring sits on the foot-end crossbar.

Today we took it into Verlo (we were over there for something else, so it was a good time to drop it off). They're going to replace it because it's a manufacturing defect (the break is right at a knot in the wood), and they're also going to replace the other half, too, because they don't build them the same way and if they only do one they won't match properly.

[ profile] teeka has the truck, and is going to pick them up on her way home from work, and then, at some point, we're going to have to drop off the other half of the old box spring as well. Hopefully the weather isn't too bad when she gets them, as they don't fit completely in the truck....
revchris: (Default)
Being a nice day, I started in on chopping drainage channels in the ice at the crosswalk on the corner, so that it'd drain and wouldn't pool new ice. Base channels took until lunch, and then after lunch, most of the neighbors were out helping each other shovel the piles at the end of driveways out into the street so that they'd melt, and people with short cars could see over them.

Then they all came over, and we pretty much destroyed the ice in the intersection (the contractors with the graders who do the neighborhood don't do a very good job of scraping the intersection bare), all the while talking about who's doing what and so on. We had 12-14 people standing around the intersection at one point, with ice choppers, shovels, and my digging bar (which destroys ice buildup), occasionally getting out of the way of cars.

Then I cleaned up some of the old seed, hulls, etc. under the bird feeder, until 'd filled the composter. If I do more, I'm going to have to start filling the neighbor's composter.

After that, we went to Menards for some shelf boards to do the closet in the computer room/office. We never put clothes in there, so we're going to put shelves at about 16" spacing to hold all the craft stuff and random electronics that have piled up there. I ripped the tongues off some old T&G boards from the garage, gut them to fit the sides and back wall as perimeter shelf supports, and then [ profile] teeka painted them. They're currently out in the garage (with a heater) drying, albeit slowly.

Tomorrow we'll install the shelves, and clean up the room somewhat, and then we're probably going to clean the carpeting in the bedrooms and computer room.
revchris: (Default)
Next step is to clear the truck off and go to the hardware store.

The preceding steps involved snow blowing the driveway and shoveling all the walks.

Why, you might ask, if I have a snow blower, am I shoveling the walks? That's because the intermediate step between those two involved the drive belt on the snowblower failing.

I've looked in the manual, so I know how to replace it, but I have to go take the old belt out in order to find out what kind it is, because the manual doesn't say.

Busy Day

Dec. 6th, 2008 06:36 pm
revchris: (Default)
Today I cleared all the sidewalk and the driveway of snow, then sanded and salted same.

Next it was off to Woodman's for people food, bird food, and candy making supplies, with a stop at the hardware store for propane and a bacteriostat and a new wicking pad for the humidifier.

Then I went back and cleaned up the end of the driveway after the plow came through, and then shoveled off the edges of the roof, and then drove over to the hardware store for shear pins because the plow berm did in one of the ones in the blower, and I couldn't find any spares in the garage.

After a lunch break, I spent the afternoon installing a second lampworking station in the garage (canopy hood, tile on the counter, torch) and cut quick connects into the line for the first torch to allow the second torch to run simultaneously.

Now I'm going to start some laundry.
revchris: (Default)
I got the snowblower to start. I've also downloaded the manual, and will eventually have to run the carburetor through an adjustment cycle. It runs, but only at full throttle, but the adjustment process isn't hard, just time consuming.

[ profile] teeka and I redid the lower workbench (that she had been using for cutting glass) to make it shorter so that there can be a second lampworking station. Eventually we (I) will have to cut in and install a second exhaust hood as well, but that'll wait until there's actually a second torch in place.

I also got my workbench mostly cleaned off, and next I should hook up the dust collector so that I can use it while I'm turning. I might get to that next, or I might just go out and make stuff, and clean up afterward.

The dust collector closet also now has a sweep on the bottom of the door and weatherstripping all the way around the door so that it seals. There are a few small leaks, but almost all of the air goes out the external vent.

Of course, I also realized that I've been messing with the weather. We had been planning on moving the camper to Stoughton for the winter, and the snowblower wasn't working, so of course it snowed today. We've since decided to leave the camper in the driveway so that we have a chance at selling it over the winter, and I've got the snowblower working, but I've also admitted to screwing with the weather....
revchris: (Default)
Yesterday I was a slacker (well, not entirely - I did laundry and dishes).

Today, however, I've actually gotten some work done.

The lawnmower has been run dry, folded up, bagged, and stashed at the back of the garage.

The snowblower has been dug out, I got the electric start to engage properly, but I haven't gotten it to start yet. I also cleared out where it parks over the winter, which gives me more room to work in the garage.

We went to Menards for parts, and [ profile] teeka now has a timer for her rod warmer and the heat lamp that keeps her feet warm, so that she doesn't have to worry about leaving them on.

Tomorrow I'm going to do more work on cleaning the garage, try again to start the snowblower, and replace the rubber flap on the garbage disposal.
revchris: (Default)
The party went well. A bunch of people showed up, everybody had fun, almost all of the food we cooked got eaten, and Maggs had a lot of fun cooking for an army.

Today we're going to finish the cleanup (not a lot required), and finish making and cooking the eggrolls and rangoon so that we can freeze them or feed leftovers to anyone who happens to stop by.

Later today, Maggs is going to go out and start working on her "Eye of Sauron"project.

It's done!

Oct. 19th, 2008 08:42 pm
revchris: (Default)
This morning I finally finished the hardwood floor. The last transition strip is in, including trimming the molding around the end of it.

This afternoon I started raking leaves. The trees around the house have just started dropping leaves, and I've already got three large piles on the apron waiting for the city to take them away. The crabapple and the tree in the Fulton-side apron are ~1/3 down, but the other four trees haven't really started. The neighbor's tree by the driveway has only just started, too, but that's the biggest tree and has a lot of leaves to go. I just hope they're done by the time it starts snowing (last year they weren't quite).

Next, it's time to start cleaning leaves out of the gutters!
revchris: (Default)
They finished paving our neighborhood today. Base coat asphalt on Northland, Fulton, and Nancy, and topcoat on all three plus School. The roads really needed it, but it's also nice for them to be done. I'd guess that all the cones and barricades will go away either tonight or tomorrow. One of the neighbors said they were pushing hard to get it done so they didn't have to wait for things to dry out after tonight's predicted rain.

I'm over the swelling and most of the itching from the allergic reaction, now I'm waiting for everything to finish peeling and for the last of the red to go away. We're fairly sure that it was a reaction to something on the celery we bought for the potato soup. I was talking with John at Jim's Meat Market (where we got the Italian sausage), and he says they stopped using celery in everything a while ago. They used to fail a health inspection every year or two, and their health inspector suggested they cut out the celery, as it's apparently a common source of pollutants, including dirt and agricultural chemicals. John says they haven't failed an inspection since (he said it's been 10 years).

The cats spent the day at the vet for teeth cleaning. Jackie had one tooth removed, Marley had one canine and three other teeth pulled. The vet's pretty sure that Marley's weight loss is related to the dental problems. [ profile] teeka got home with the cats shortly after I got home, and we shouldn't laugh, but Marley was frantically throwing food around because her mouth was still numb while she was trying to eat something (anything? everything? whatever a starving kitty needs!).

Yesterday I rebuilt my mother-in-law's computer. Her old one stopped working while they were trying to figure out what she'd need to do to run Adobe CS3, so they decided that it was time to upgrade. I picked a kit from Tiger Direct, and they went from a 3GHz Celeron with 512MB or RAM to a 2.2GHz Dual Core with 2GB. I built the new machine a couple weeks ago and swapped all the drives from the old one to the new one and traded video cards with her (I had a PCI-E/16 card and both AGP and PCI-E/16 slots, she had an AGP card in the old machine and a PCI-E/16 slot in the new machine, and both cards were similar quality), booted it up, and then went away while it figured out what drivers needed to be installed. Told it to cancel all it's install attempts, ran the driver disk, downloaded the video card drivers, a couple passes through Windows Update, and then boxed the new machine up to go back home.

I'm probably going to use the old machine and some of the accumulated other parts from home to upgrade Teeka's desktop the same way. She'll go from a pIII-900 to the celeron, which should make it a little less frustrating to use.

Anyone want to buy a camper? We've decided that we should try to sell the camper because we really only ever use it one weekend per year, and with ongoing maintenance and what we went through this time to get it hooked up to the truck, it's really not worth it.
revchris: (Default)
Last weekend we were in Oregon, IL, for Stronghold's Olde English Faire.

Getting there was an adventure in itself. We take the camper with us so that we have a place to sleep and an easy way to haul the tent poles (8' poles don't fit well in a 6' truck). Friday morning we loaded the truck with all the booth stuff and the camper with sleeping bags, garb, clothes, food, and the tent poles.

Then I went to switch trailer hitches (the vending trailer is an 1-7/8" ball, the camper is 2"). I haven't had to switch hitches since Stronghold last year, so it really wasn't surprising that the lock on the hitch pin was sticking. After about 10-15 minutes and some TriFlow, I got the key to rotate far enough to unlock the pin, but not only didn't the lock release, the key wouldn't rotate back. So I got out the sawzall and removed the lock.

Then the receiver post wouldn't pull out of the receiver body. Coercive attempts with a 12# sledge hammer were unsuccessful, so we drove over to U-Haul and bought a new hitch pint (just in case it ever loosens up) and a universal post kit (you permanently mount the post and then it has both sizes of interchangeable balls) and had them install it.

A quick stop at Badger Welding Supply for a new small oxy tank, and it was back home to hook up the camper. The camper hitch wouldn't open far enough for us to get it over the ball because the surge brake cylinder had finally failed and the actuator was jammed in the "full brakes" position. So I got out the sawzall and I cut that out of the system (actually, it took a 3/8" wrench to snap the four mounting bolts off and let the cylinder drop out of the hitch, but it really seemed like a good place for a sawzall). I'm not worried about not having the cylinder in place, since it's never been functional since we got the trailer, you just have to pay attention and stop early because it's an extra 3,000# pounds of rolling load).

Finally, we've got the camper hooked up and everything loaded, and we're on our way. Unlike the way this post is trending so far, we actually got to the faire site without any other problems, other than the fact that we're now a few hours later than I had hoped, and it's getting dark.

Fortunately, we've put up the tent often enough that we can do it by flashlight if necessary. We got the tent set up, set up all the tables, and piled everything into the tent, closed all the sidewalls, and went out to get dinner. We then hung out in the camper for a while and read, and went to bed around 10p. Friday night the temperature got down to 36F. Saturday morning, we both were awake before the alarm clock, hoping that the other one would get up and make heat happen (the heater in the camper was dead when we bought it, but we've got a Coleman lantern and a camp stove, both of which put out a fair amount of heat). I got up first and made fire and then headed off to the privy. By the time I got back the fog was thick enough that you couldn't see the next campsite.

After breakfast we drove back to the faire site and set up the tent. Every time we set up it's a little different as we've got an ever-changing set of stuff for sale. Saturday was about normal for sales (in the "very good show" range), and then we closed up, had dinner, and went back to the camper for the rest of the night.

Saturday night was warmer (~44F), but Sunday morning it rained on and off until ~12:30. Sundays normally are slow in any small outdoor fair in the midwest because you've got to wait for most of the people to get done with church. Of course, when it's still drizzling after church, they mostly stay home instead of going out to the fair, so Sunday's sales were only about 30% of Saturday's, but were also about what we expected out of a rainy day. Overall we took in enough that even with the roadshow expenses, we made more than a Farmer's Market day would (our normal guideline for whether or not to keep doing a road show), and we made enough to pay for getting the cats' teeth cleaned (our other goal for this weekend).

We got home around 10p on Sunday and left the camper and truck on the street. It's much easier to back the camper up the driveway on Monday morning after I've had a full night's sleep and it's light out. After I parked the camper I did some errands and then took Marley to the vet for blood tests they needed to go to make sure she'd probably survive the anesthesia during the dental work. Then it was off to work for the afternoon.
revchris: (Default)
We're still steadily moving forward on Faire prep. We even created a new product line this week, more info when I get pictures out of my camera. Today's completed projects were building and staining frames for the display boards that normally go into the easels so that they can hang on walls, and building a bench for the back of the shop.

Tomorrow's plan is to varnish the dichro frames and to cut flashing and tarp to build fire-resistant panels for protecting the glass-working area. It's a wood shop. If things go bad, our shop, the other shop in our building, and the next two buildings probably all go up. We're going to cover the side wall (in the direction that things normally fly) with aluminum flashing, and we're going to put a section of fire-resistant tarp down on the floor. And we're going to pack several fire extinguishers, just in case.

Today's non-faire project was cleaning out the gutters on the driveway side. The entire length of the house was full of maple seeds (half of a yard waste bag of them!), and the downspout was plugged with crud. Tomorrow I should probably look at the other two sides.

Tomorrow I need to take the lawnmower in for service. Currently the starter doesn't always engage, and the gas tank drains out through the air filter (which is the more important problem). I could fix them myself, but I don't have time, and the lawn already hasn't been mowed in a week.

We're home

Jun. 8th, 2008 10:51 pm
revchris: (Default)
Really crappy weather for an outdoor show weekend.

Saturday, Pirate Fest shut down early because of weather. First they shut us down around 5:30 because PWPD was telling everyone that they were expecting 100MPH straight-line winds. Then, about 6p we went back outside because the front had gone through, and, while we were trying to decide whether to unseal tents, the faire organizers decided that since there was another front due in about half an hour, it wasn't worth opening up, then closing until the weather cleared, and then opening back up for whoever possibly might have stayed. So we closed up shop and headed back to Keith & Kendra's, where we got to hang out for a while for Keith's birthday party (instead of getting back around 11p because the faire was supposed to have gone until 10p).

Getting to K&K's, however, was a whole other story. We were on I43 when the second front hit. I could see where the road was, but traffic slowed down to about 40MPH. When we got to Capitol, it was closed at Port Washington Road because the underpass was flooded. We followed the rest of the traffic south on PW and then eventually east through the city until the leader of our group led us all into a dead end. Eventually, after carefully driving through a lot of flooded intersection, we made it to Humboldt, and then back to Capitol. Humboldt had a flooded stretch that was over the hubcaps, but we made it through, and then over the bridge to the higher side of the city, where there were fewer flooded spots.

Today it also rained a lot, but the faire stayed open the whole time. Not many people were out today, but things picked up around 3, but not to where we had hoped. All in all, we made expenses plus about what we would have made on a normal Farmer's Market, making it a fairly good show, with the weather that we had.

Driving home today we took Brown Deer to 45 to I94 in order to miss all the construction. We stopped at Target and bought a roll of duct tape and sealed the trailer up (after a weekend of rain, one of the roof panels had warped enough that the lid wouldn't seal). Heavy Dudy All-Weather Duct Tape (I don't recall what brand) works well. Nothing came loose during the trip back, even though there was enough rain to slow everyone down to 55MPH for most of the trip, with drops to about 30 in the worst spots. We still got some water in the cart, but not as much as we would have had without the tape. I've currently got a fan blowing into the cart to try and dry it out somewhat.

When we got home, there is a little water in the basement, so tomorrow I'll have to clear the driveway side downspout (I'm sure it's full of maple seeds). Eventually, I'll have to try and seal the crack under one of the windows, as that's the first place that leaks. I also now see that I need to knock out the patch from (I think) the original water line and reseal it, as it's also leaking a little. That part of the foundation is also covered by the driveway gutters, so clearing that side should fix both spots. Meanwhile, there's a fan and a dehumidifier working on the basement.

I'm also doing laundry. All the tablecloths are wet, so they and our garb are in the washer & dryer right now so that we don't have to worry about mildew or permanent stains.

Tomorrow we're planning on day tripping to Chippewa Falls to take the tables and other big display elements to the shop we're renting and to measure the place so that we can figure out what we want to do for displays. Then I'm going to spend the rest of the week making displays and getting stuff ready, as the faire opens Saturday for a five weekend run.

I also need plan to put new wheel bearings and bearing covers into the trailer because the current ones are two years old, the caps have been missing for a year, and I'm sure that all the water tonight isn't going to help. I'll for sure regrease them before the trailer goes on the road again, but if I can find the manual to order new parts from, I'd like to do some more extensive maintenance.
revchris: (Default)
[ profile] teeka had kiln problems earlier this week because the control relay welded itself closed. This causes the kiln to hold temp at 957C, which is hot enough to puddle any glass in the kiln. Fortunately, she hadn't done anything yet when I noticed it. I shut down the main power to the controller, and then I cleaned the contacts with some 400 grit sandpaper, and turned it back on to cool down, with no problems.

Last night, she made more beads, and everything was worked properly. When I got up this morning, I noticed that her shop was at 82F, so I figured she'd left the heater on, and I'd turn it off on my way to work. Then I looked out the window above my computer, where I can see her kiln. It's power light was on continuously (the light comes on when the controller supplies power to the furnace, so it should be blinking), and the kiln was glowing bright orange around the bead door.

At some point during the cool down part of the cycle, after she had gone to bed, the relay welded itself again.

I just ordered a new relay to replace the current one, and I ordered a second relay to wire into the alarm circuit of the controller to act as an overtemperature limiting relay and cut the power when the controller goes above the specified alarm temp. Mechanical relays are only good for about a million cycles. We're going to start replacing the main relay every year as a maintenance item, and I'm going to try to clean the relay contacts every three months to help limit contact resistance.
revchris: (Default)
All of the transition strips are now in, except for the long one in the living room/kitchen doorway, as that's still on backorder. The front door transition will need a little bit of filler caulk as the entryway wood section is slightly taller than the main floor, and that makes the transition strips roll outward just a little, and the miter joint at the corner of the transition doesn't close right (and I couldn't figure out a good compound angle cut to make it work).

I finished the first half of the drop ceiling installation in the basement, using 28 tiles, one accessory clip, and 2 octagonal extender boxes. The ceiling light fixture sticks out from the tiles about 1/2", but unless I special order a 1" extender ring, that's how it's going to be. The other side has all the track up except for around the booze shelves, but I'll get to that later this week probably. Then it'll need about three boxes of tile. I decided to get the first section done (which took a trip to Menards today for 4 tiles) so that if by the time we get tiles they've changed designs, each side will be all one pattern.

[ profile] teeka dug a new bed and planted asparagus in it, and I put a planter ring aorund it for her. Now, as the asparagus starts to come up, she's going to slowly fill it in until it's the right depth. Then we'll pick up the tarp that the dirt for the bed is currently sitting on and replace the dead grass that'll be underneath it by then.

It took most of a day of fiddling around, but I finally got the lawnmower to start, and it ran long enough to go around one section of the yard once, then it died, and while it would restart, wouldn't keep running. I'm going to let it sit until tomorrow and then try it again, hoping the gumout that's in the gas will do it's thing by then. Then all I have to do is figure out how to take the pull-cord clutch apart so I can see why it isn't engaging most of the time when I pull the rope.

I also finally got around to putting a new blade on the miter saw. The old one has been on for several years, including two flooring projects. Looking at it, it's missing two teeth, and has several chipped teeth. My miter saw now cuts through things a lot easier, which tells me I probably should have changed it a while ago.


revchris: (Default)

June 2010

20 212223242526


RSS Atom

Most Popular Tags

Style Credit

Expand Cut Tags

No cut tags
Page generated Sep. 20th, 2017 06:27 pm
Powered by Dreamwidth Studios